2005 Honda Accord O2 Sensor Bank 1 Sensor 2

Clear The Code With Obdii Scanner Or Remove Negative Cable For 2 Minutes.

It's the rear o2 sensor,the one behind the catalytic converter. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. Bank 2 is the front bank or cylinders 4, 5, and 6 and the catalytic converter is mounted directly to the exhaust manifold, the sensor 2 is after the catalytic converter.

Here Is Some Knowledge For You, The Oxygen Sensor You Are Referring To, Which Is The Lower One, Has Absolutely No Bearing On Fuel Consumption.

Bank 1 sensor 1 is the first sensor closest to the engine. Wait until the exhaust cool for 1 hours. Sensor 2 is downstream of the catalytic converter.

4 Or 6 Cylinder Engine.

Where is bank 1 sensor 2 located on a 2005 honda. On bank 1 means it is at the engine side with cylinders 1, 3, 5, 7, etc. Bank one will be the side of the engine with cylinder 1 in the firing order.

Disconnect The Connector And Clean The Contacts With.

Bank 1 sensor 2 is the second sensor on the engine’s exhaust pipe, usually behind the catalytic converter.on bank 1 means it is at the engine side with cylinders 1, 3, 5, 7, etc. Asked nov 5, 2016 by anonymous. Wait until the exhaust cool for 1 hours.

If You Look Under The Car From The Front And Follow The Exhaust Pipes, It Is The One You Can See Easily.

Serpetine belt diagram on 2005 honda pilot. The code means that there is a problem with the heater element circuit of the heated oxygen sensor. Asked feb 7, 2017 by anonymous.