2008 Chevy Cobalt Door Lock Problems. Driver side door intermittently will not close and remain closed (latch). Chevrolet cobalt owners have reported 2 problems related to power door locks not working (under the electrical system category).
15777136; CHEVROLET COBALT OEM Front Door Switch Driver's from www.ebay.com
The locks will sporadically lock and unlock on there own even though i pulled the door lock fuse. Turned the key to lock the door. Your problem is that your door lock switch is shorted out.
2008 Chevrolet Cobalt Common Problems, Issues, Recalls, And Reliability 2008 Chevrolet Cobalt Ignition Key Stuck Due To Failed Shifter The Automatic Transmission Shifter In Floor Console May Fail Causing The Key To Become Stuck In The Ignition Lock Cylinder.
Pressed the lock button on the key fob once 4. Turned the key to lock the door. The vehicle identification number tells you if your car is affected.
189 People Have Reported This.
His power door locks are locking/unlocking all by themselves, with or without the ignition running. Maintenance & repair when we got the car it had some electrical issues weren't serious until winter hit and our driver side door stopped opening weather the car was locked or unlocked we understand there's something wrong with the body control module but. The power door locks will not work with the door buttons or the fob.
Posting This For A Friend Who Has A 2008 Cobalt, Trying To Get Some Help For Him.
It reacts to you pressing the lock or unlock button, and sends a simple signal to the actuator. Video tutorial on how to replace door lock buttons on a 2006 chevy cobalt. Put the key in the driver door (door closed) 3.
When The Condition Is Present The Door Locks Are Inoperative From The Switches, However They Work Normally With The Key Fobs.
Maintenance & repair when we got the car it had some electrical issues weren't serious until winter hit and our driver side door stopped opening weather the car was locked or unlocked we understand there's something wrong with the body control module but not sure if. This is basically the steps in the owners manual, but the car must be started with the key first, and the key must be in the door lock before pressing the lock button. The door lock actuators were the real problem.
Please Also Check Out The Statistics And Reliability Analysis Of The 2008 Chevrolet Cobalt Based On All Problems Reported For The 2008 Cobalt.
The actuator is a series of gears, with a set of rack and pinion gears. If all of the door lock switches are functional but one door fails to operate, the most likely problem is an open circuit in the circuit between the switch and solenoid or a defective solenoid in the affected door. The most recently reported issues are listed below.
