Harmonic Balancer Removal Without Puller. And there is no need to remove the radiator with this convenient engine harmonic balancer puller, saving valuable time when removing harmonic balancers. Look into the holes in the balancer in the photo below.
Harmonic Balancer Damper Remover Puller For GM Chrysler from www.ebay.ca
Then put the balancer puller center bolt in. Compatible with jeep/compatible for gm/compatible for chrysler/compatible for dodge balancers without. How to remove a harmonic balancer without a puller?
How To Remove A Harmonic Balancer Pulley.
You turn it counterclockwise to loosen it. Starting in '91 the 3800 balancer was a tapered fit to the crankshaft and required a puller to remove it. First remove radiator fan shrould.this will give you access to the fan.remove fan and fan belts.remove bolt on harmonic balancer.you will need to rent a balancer remover and installer kit.most big auto parts chains will rent these kits to you.next remove four bolts holding pulley to balancer.next attach balancer puller to balancer with long bolts from kit.using a 1\2 drive.
The Crankshaft Should Be Protected During The Crankshaft Pulley Removal Process By Installing The Harmonic Balancer Bolt.
Use a durable strap to remove the harmonic balancer; Then locate the serpentine belt and apply pressure on it to keep it in position from. This harmonic balance puller set is designed for removing harmonic balancers, gear pulleys, steering wheels and flywheels.
How Do You Remove A Harmonic Balancer Pulley?
Identify the main body of the harmonic balancer puller tool. Using a breaker bar, remove the harmonic balancer retaining bolt. You will have to first remove the serpentine belt to access the balancer.
Access The Harmonic Balancer By Removing The Serpentine Belt.
Steps on how to remove the harmonic balancer. Regarding this, can you remove a harmonic balancer without a puller? You would have to take off the cover of the engine, shrouds, or plastic guards that cover the working area.
Remove The Timing Chain Cover.
How to remove a harmonic balancer without a puller? The longer the better, at least 4, but i use 5. Assuming your oilpan is not removed, you can often remove your starter and prevent the flywheel or flexplate from turning while you loosen the bolt.
