Jensen Touch Screen Radio Problems

Waterproof Uv And Corrosion Resistant;

Press to return to main menu. There are a couple different trim options for this stereo, so if you are removing one of them, you will just carefully pry them away from the unit near the tabs. 240 watts (60 w x.

7” Multimedia Receiver With Usb Screen Mirroring.

Press and hold to set the current station in that preset spot. Step 4 verify that the video display’s automatic open feature is selected if the monitor doesn’t. Car radio screens start to fade over time because the internal connections become loose, or when the screen is mechanically damaged, for example, when it is pressed using too much finger pressure.

It Will Probably Need To Be Replaced.

Install a fresh set of batteries in the remote control if you are unable to deselect mute, or if your jensen stereo doesn’t appear to function correctly. After that the sound went to a high pitch with a lot of static as you increased the volume with very little sound. Repair of the fading damaged screen is not often possible.

Part Of The Touch Area Doesn’t Respond Inconsistently.

Press to access bluetooth phone. Press menu until bluetooth device shows up and press enter to select. • if you experience problems during installation, consult your nearest jensen deale.

Combination Auxiliary/Usb Input Radio Accessory;

3.5mm auxiliary audio jack input connects any mp3 player or external audio device; Now press and hold the menu button to enter system setup. September 26, 2018 at 2:56 pm.