Whirlpool Refrigerator Defrost Timer Reset. Remove the rear bottom panel with a phillips screwdriver or a socket wrench. Move the dial of the thermostat to the ‘off’ position.
ForeverPRO R0131577 Defrost Timer Kit for Whirlpool from www.walmart.com
To adjust or set the defrost timer on a whirlpool refrigerator, take the following steps: If your model has more than one thermostat at the back of the unit, as most whirlpool models. It needs to be turned until the fan stops, which means your fridge has reset the defrost button.
Turn The Notch Until The Refrigerator Fan Has Shut Off.
Assemble the timer back onto the fridge and reinstate the power supply. This is a 2 part video series discussing some symptoms of a bad defrost timer for a whirlpool refrigerator. This did not fix the issue (still would not start at all).
To Adjust Or Set The Defrost Timer On A Whirlpool Refrigerator, Take The Following Steps:
Simply pull the plug from the wall outlet for about 30 seconds. Plug your whirlpool refrigerator/freezer into the electrical outlet. Plug your whirlpool refrigerator/freezer into the electrical outlet.
Disconnect The Wires From The Timer And Timer Motor.
To reset the refrigerator defrost timer, tepte simply states to locate the circular notch on the timer and turn it counterclockwise with a flathead screwdriver. Connect the new defrost timer the same way the old one was connected. This should bring your freezer back.
Then Hold Down The Door Switch Or Switches, The Display Should Go Blank.
Locate the switches adjacent to the refrigerator door by opening it. Initially, using the reset procedure for the defrost timer seemed to work (shut off for few minutes, and turn back on), so we replaced the defrost timer board. Now, release the ice tray.
Give It About 30 Seconds Before Plugging The Unit Back Into The Outlet Again.
Remove the panel that is below the refrigerator doors. I hope this video can help someone save some mon. On the front of the defrost timer there will be a circular notch.
